Buying guide
Bodkins
Our pick
Dritz Ezy-Pull Bodkin 706
Why this one
- Start with Dritz 706 for threading elastic or cording through a casing when the tool fits the opening. Its sliding ring tightens the toothed clamp around the elastic before you pull it through.1
The alternatives
Other contenders
Choose Clover 4001 when you need both a binding tool for fairly wide elastic bands and a tied-eye tool for fine elastic string. Tighten the binding tool’s ring around a band, or tie the fine string to the other tool’s ring.3
Clover Clip n Glide Bodkin 9582
Choose Clover 9582 for a clip attachment when your elastic is at least 5/8 inch wide and the casing opening is at least 3/4 inch. Check both limits before choosing this tool for pulling the elastic end through the casing.24
Buying advice
- For Dritz 706, open the ring, place the elastic or cord between the teeth, then slide the ring back to tighten the grip before entering the casing. The maker also recommends rounding elastic corners to help them slide through.1
Compare the options
3 products
Compare models side by side
Choose two or three products to compare.
Models in this comparison



Every specification for these products
| Specification | Dritz Ezy-Pull Bodkin 706 | Clover Bodkin (2 Types) 4001 | Clover Clip n Glide Bodkin 9582 |
|---|---|---|---|
| Gripping design | special 'teeth' that grip well and are held together by a sliding ring1 | Binding-Type Bodkin: For fairly wide elastic band. Release the ring and bind elastic band. Tighten by moving the ring towards the indicated direction. Head-Type Bodkin: For fairly fine elastic string. Tie the elastic string to the ring part of the bodkin.3 | Clip provides firm hold on elastic end!4 |
| Threading uses | Thread elastic, ribbon and drawstrings into waistband and sleeve casings1 | For fairly wide elastic band.3 | elastic end for pulling through casing2 |
| Elastic and casing fit | — | Binding-Type Bodkin: For fairly wide elastic band. Release the ring and bind elastic band. Tighten by moving the ring towards the indicated direction. Head-Type Bodkin: For fairly fine elastic string. Tie the elastic string to the ring part of the bodkin.3 | Suitable elastic width: 5/8 in. (15 mm) or wider – Width of casing opening: 3/4 in. (20 mm) or wider2 |
How they compare
| Specification | Our pickDritz Ezy-Pull Bodkin 706 | Clover Bodkin (2 Types) 4001 | Clover Clip n Glide Bodkin 9582 |
|---|---|---|---|
| Buy | |||
| Gripping design | special 'teeth' that grip well and are held together by a sliding ring1 | Binding-Type Bodkin: For fairly wide elastic band. Release the ring and bind elastic band. Tighten by moving the ring towards the indicated direction. Head-Type Bodkin: For fairly fine elastic string. Tie the elastic string to the ring part of the bodkin.3 | Clip provides firm hold on elastic end!4 |
| Threading uses | Thread elastic, ribbon and drawstrings into waistband and sleeve casings1 | For fairly wide elastic band.3 | elastic end for pulling through casing2 |
| Elastic and casing fit | — | Binding-Type Bodkin: For fairly wide elastic band. Release the ring and bind elastic band. Tighten by moving the ring towards the indicated direction. Head-Type Bodkin: For fairly fine elastic string. Tie the elastic string to the ring part of the bodkin.3 | Suitable elastic width: 5/8 in. (15 mm) or wider – Width of casing opening: 3/4 in. (20 mm) or wider2 |